Body contact
Skin should contact the conductive surface, or the actual bedding arrangement should be tested.
Grounding Pillowcase
A conductive grounding pillowcase made with 5% Silver Fiber + 95% Organic Cotton.
Size: 50 × 75 cm.
Each pillowcase includes one U.S. standard grounding cord. The cord is included in the price.
For grounding-compatible textile use with a verified ground connection. Not a medical device; not intended to diagnose, treat, cure, or prevent any disease or medical condition.
Grounding Pillowcase
Sale price$10.00
Grounding Is a Complete System
A grounding pillowcase works as part of a complete connection path. The conductive silver-fiber fabric provides the contact surface, while the connector, grounding cord and a verified earth ground complete the system. The pillowcase is passive—it does not supply power.
Continuous path
The textile, connector and grounding cord must remain securely connected.
Verified earth
The outlet or grounding point should be checked before the pillowcase is used.
Conductive material alone is not a complete grounding system. An extra fabric layer may affect contact, so verify the arrangement you actually use.
Set Up. Connect. Verify.
Fit the pillowcase, check the outlet, connect the cord, then verify the conductive surface.
-
Step 1
Fit the pillowcase
Place the pillow inside the case and keep the conductive surface available for the intended contact arrangement.
-
Step 2
Check the outlet
Use a compatible socket tester. Continue only when the outlet or grounding point shows a verified ground connection.
-
Step 3
Connect the cord
Secure the cord to the pillowcase connector, route it without tension and connect the designated ground-only plug.
-
Step 4
Verify the surface
Use a compatible conductive-textile tester at several points on the conductive area, following the tester’s instructions.
Socket tester checks the receptacle before connection.
Product tester checks the conductive pillowcase after connection.
Neither tester measures health effects.
Care That Preserves Conductivity
Care should protect the conductive textile pathway and the connector—not only the appearance of the pillowcase.
Wash
- Disconnect the grounding cord before washing.
- Follow the product’s specified washing frequency.
- Use mild liquid detergent and cool-to-warm water.
- Select a gentle cycle.
- Line dry when possible or tumble dry on low.
Avoid
- Bleach and whitening agents
- Fabric softener
- Oxidizing detergents
- Heavy oils or lotions on the contact area
- High-heat drying
- Pulling or twisting the connector
Retest
Retest the actual setup after washing, changing bedding layers, moving the pillowcase, replacing the cord, connector damage or inconsistent test results.