Body contact
Skin should contact the conductive surface, or the actual bedding arrangement should be tested.
アースシーツ
アーシングは、様々な健康問題に関連する体内の炎症を軽減することが科学的に証明されています。アーシングは、関節の痛みや炎症を軽減し、全体的な健康と活力を促進します。より健康的でバランスの取れたライフスタイルのために、アーシングの力を取り入れましょう。
カスタマイズされたサイズもご用意
アースシーツ
セール価格$7.50
Grounding Is a Complete System
A grounding sheet works only as part of a complete connection path. The conductive silver-fiber grid provides the contact surface, while the snap, grounding cord and a verified earth ground complete the system. The sheet is passive—it does not supply power.
Continuous path
The textile, snap and grounding cord must remain securely connected.
Verified earth
The outlet or grounding point should be checked before the sheet is used.
Conductive material alone is not a complete grounding system. Clothing or an added sheet may affect contact, so verify the arrangement you actually use.
Set Up. Connect. Verify.
Follow one clear sequence: fit the sheet, check the outlet, connect the cord, then verify the conductive surface.
-
Step 1
Fit the sheet
Secure the fitted sheet over the mattress and keep the conductive surface available for the intended contact arrangement.
-
Step 2
Check the outlet
Use a compatible socket tester. Continue only when the outlet or grounding point shows a verified ground connection.
-
Step 3
Connect the cord
Press the snap fully into place, route the cord without tension and connect the designated ground-only plug.
-
Step 4
Verify the surface
Use the compatible product tester at several points on the conductive area, following the tester’s instructions.
Socket tester checks the receptacle before connection.
Product tester checks the conductive sheet after connection.
Neither tester measures health effects.
Care That Preserves Conductivity
Care should protect the conductive textile pathway and the connector—not only the appearance of the sheet.
Wash
- Disconnect the grounding cord before washing.
- Follow the product’s specified washing frequency.
- Use mild liquid detergent and cool-to-warm water.
- Select a gentle cycle.
- Line dry when possible or tumble dry on low.
Avoid
- Bleach and whitening agents
- Fabric softener
- Oxidizing detergents
- Heavy oils or lotions on the contact area
- High-heat drying
- Pulling or twisting the connector
Retest
Retest the actual setup after washing, changing bedding layers, moving the sheet, replacing the cord, connector damage or inconsistent test results.